Article Explorer

Abrasive Wear in Some High Fe-Cr-C Alloy in Cement Powder

A Case of Facial Erysipelas with Necrosis of the Upper Eyelid

Synergistic Assessment of Supplementation of Ascorbic Acid and Massularia acuminata Extracts on Serum Electrolyte and Lipid Profile Indices of Dyslipidemia in Adult Wistar Rats Exposed to Aluminum Chloride Toxicity

Revisiting 2,000 Years of Climate Change (Bad Science and the “Hockey Stick”)

Solar Energy Resource Potentials of the City of Arkadag

The Reference Book of the Neology of the Spanish Language

Deep Learning-based Multi-class Three-dimensional (3-D) Object Classification using Phase-only Digital Holographic Information

Relationship between Sustainable Development, Economy and Poverty

Study of the Histological Features of the Stroma of High-Grade Gliomas Depending on the Status of the Mutation in the IDH1 Gene

Efficacy of Different Concentrations of Insect Growth Regulators (IGRs) on Maize Stem Borer Infestation

A New Modification of Classification of Traumatic Patients with Pelvic Fracture

Application of Virtual Reality (VR) in Facility Management Competency-based Training (CBT) in the Era of Industrie 5.0

Investigation and Energy Modeling of New Generation Environmentally Friendly Energy Source Thorium Fueled Molten Salt Reactors

Communication Training at Medical School: A Quantitative Analysis

Trend of SO2 Gas Dry Deposition in Vietnam

Effect of Rainfall on Water Parameters in Recreational Lakes in Heidelberg, Germany

The Dibia in Igbo Traditional Socio-political and Metaphysical Economy: An Interrogation

Mars Ascent Propellants and Life Support Resources - Take it or Make it?

Influence of Polycarboxylate Superplasticizer on the Calorimetric and Physicomechanical Properties of Mortar

On the Governing Equations for Velocity and Shear Stress of some Magnetohydrodynamic Motions of Rate-type Fluids and their Applications

Threat to Human and Animal Health Caused by Mycotoxins and Masked Mycotoxins Occurring in Food and Feed

Exploring Upper Limb Kinematics in Limited Vision Conditions: Preliminary Insights from 3D Motion Analysis and IMU Data

Risk of Nutritional Deficiencies and Changes in Dietary Patterns after Bariatric Surgery

The Kazakh Language Requires Reform of its Writing

Exploring Markov Decision Processes: A Comprehensive Survey of Optimization Applications and Techniques

The Contribution of Medical Periodicals to the Development of Pediatric Science in Modern Conditions

A Capsule Neural Network (CNN) based Hybrid Approach for Identifying Sarcasm in Reddit Dataset

New HMPV Virus Outbreak: Emerging Concerns and Public Health Implications

The Antioxidant and Antidepressant Properties of Dietary Proteins Derived from Egg and Bean Extracts and Their Acute Toxicity: A Journey from Nutrition to Pharmacognosy

Fred Vlès – Early Holistic Biophysicist and Pioneer of “Earthing”

The Role of CCL18 in Rheumatoid Arthritis Diseases

Analysis of Damages to Boiler Screen Tubes BKZ-160-100-GM (Barnaul Boiler Plant, steam productivity 160 t/h, pressure 100 kgf/cm2, Fuel: Natural Gas/Fuel Oil) after Reconstruction for Increased Steam Productivity to 210 t/h

The Role of Supplementation in Enhancing Recovery and Endurance among Fitness Trainers

Utilising Phytoremediation in Green Technologies: Exploring Natural Means of Environmental Clean-up

Screening for Sexually Transmitted Infections in Adolescents with Genitourinary Complaints: Is There a Still Role for Endocervical Gram Stains?

Correlation between Different Factors of Non-point Source Pollution in Yangtze River Basin

Impact of Insect Growth Regulators on Maize Stem Borer: A Recent Research Insight

Analysis of Reliable Transmission Performance Optimization Methods for Satellite-to-Ground Laser Communication Links

Sorption-based Spectrophotometric Assay for Lead(II) with Immobilized Azo Ligand

A Comprehensive Methodology for Assessing the Business Reputation of Industrial and Production Personnel

Association and New Therapy Perspectives in Post-Stroke Aphasia with Hand Motor Dysfunction

Roadmap for Greening the Economy of Turkmenistan

Unlawful Homicide of Two Ugly and Disabled Victims in a Japanese Tale Based on a True Story

How Increased CO2 Warms the Earth-Two Contexts for the Greenhouse Gas Effect

From Motor Augmentation to Body Enhancement, the Harmony between Human Body and Artificial Parts

The Salt and Dust of the Aral Sea Could Turn Central Asia into A Second Sahara

Multicenter Molecular Integrals over Dirac Wave Functions for Several Fundamental Properties

Improved Energy Valley Optimizer with Levy Flight for Optimization Problems

Integrated Multi-fidelity Structural Optimization for UAV Wings

Isolation and Characterization of Active Alkaloid Compounds from Cinnamomum Verum Cortexes and Proof of their Medicinal Efficacy against Pathogenic Fungus Alternaria Alternate Causing Upper Respiratory Tract Inflammatory Disease

A Rare Case of Recurrent Vulvovaginal Smooth Muscle Tumor of Uncertain Malignant Potential (STUMP)

DNA Genetics and UHPLC-Q-TOF-MS Analysis of Phytochemicals for Asparagus racemosus Roots

A Comprehensive Review of Federated Learning in Cancer Diagnosis and Prognosis Prediction

Deep Semantic Segmentation New Model of Natural and Medical Images

Atmospheric Fungal Spore Injection: A Promising Breakthrough for Challenging the Impacts of Climate Change Through Cloud Seeding and Weather Modification

The use of FIKR (Facet, Insight, Knowledge, and Resilience) Personality as an Effective Assessment Tool to Select the Best Leadership in an Organization

Into the Deep: Diving Record for the Dice Snake Natrix tessellata (Laurenti, 1768) in Lake Orta, NW Italy

Gaussian-Transform for the Dirac Wave Function and its Application to the Multicenter Molecular Integral Over Dirac Wave Functions for Solving the Molecular Matrix Dirac Equation

Examining the Causal Connection between Lipid-lowering Medications and Malignant Meningiomas through Drug-target Mendelian Randomization Analysis

Wishful Thinking or Valuable Forecasts? The Value of Policy Rate Predictions in Sweden

Designing a Compact High-precision Positioner with Large Stroke Capability for Nanoindentation Devices

A Study of Multi-Pose Effects On a Face Recognition System

A Rare Entity of Idiopathic Clitoromegaly with HBsAg Positive Status Managed with Dorsal Nerve Sparing Clitoroplasty

Slip Resistance Evaluation of 10 Indoor Floor Surfaces

Revisiting Ice Ages Cycles

Analytical Expressions of the Markov Chain of K-Ras4B Protein within the Catalytic Environment and a New Markov-State Model

The Model for Clinical, Laboratory, and Genetic Prediction of Recurrent Ischemic Stroke against the Background of Laboratory Aspirin Resistance using Machine Learning

Roadmap for Renewable Energy Development

Contribution to the Knowledge of Ground Beetles (Coleoptera: Carabidae) from Pakistan

Comments to Megascopic Quantum Phenomena

Potentially Toxic Metals in Cucumber Cucumis sativus Collected from Peninsular Malaysia: A Human Health Risk Assessment

Educational Innovation amidst Globalization: Higher Education Institutions and Societal Integration

Qualitative Model of Electrical Conductivity of Irradiated Semiconductor

Issues of Manufacturability of Roller Machines

The Imperative for Modern Public Cloud Providers to Upgrade Their Data Centers

IoT-based Real-time Temperature Monitoring in Critical Systems: A Review

Efficient Room Temperature Ethanol Vapor Sensing by Unique Fractal Features of Tin Oxide

Kinetic Study of the Removal of Reafix Yellow B8G Dye by Boiler Ash

Methodology of the Professional-Business Game for the Development of a Cadet Leader in Professional Training Courses (L-1B) of the Tactical Level of Military Education

Preventing Chronic Pain: Solutions to a Public Health Crisis

Breast Cancer: The Road to a Personalized Prevention

The Influence of Low Pesticide Doses on Fusarium Molds

Peritoneal Carcinomatosis from Ovarian Cancer: A Case Report

Modeling of Cr3+ doped Cassiterite (SnO2) Single Crystals

Machine Learning Applied to Electric Vehicle Routing Problem: Optimizing Costs for a Sustainable Environment

Zinc Supplementation in Anorexic Children with Vomiting Syndrome: Evaluation from a Randomized Controlled Trial in Vietnam

Quality Culture - Lessons Learned from the Low- and Medium Income World

Innovative Strategies in the Prevention and Treatment of Peri-implantitis

Strengthening IoT Network Protocols: A Model Resilient Against Cyber Attacks

A Mini Review on Women’s Health, Focus on Menopause and Metabolic Challenges

High Resolution X-ray Diffraction Studies of the Natural Minerals of Gas Hydrates and Occurrence of Mixed Phases

Revolutionizing Duplicate Question Detection: A Deep Learning Approach for Stack Overflow

Analysis of EU Countries’ Capabilities to Achieve Ambitious “Zero Victim” Vision in 2050

Macrorhabdus ornithogaster-associated Avian Macrorhabdosis: A Narrative Review

Balancing Act: Exploring the Interplay Between Human Judgment and Artificial Intelligence in Problem-solving, Creativity, and Decision-making

Harnessing Microbes for the Benefit of Man

The policy development and current situation of information technology education in Taiwan

An Open Letter to the 2022 Winners of the Nobel Prize in Physics

Technical & Economic Feasibility Study of Proposed Pump Storage Power Plants at Kuda Oya, Mul Oya, Gurugal Oya, and Dambagasthalawa

The Intersection of Artificial Intelligence in Public Health and Personalized Cancer Therapy

Problem of Surface Waves on Water in Higher School Laboratory Workshop

A New Physical Phenomenon Discovered When Microbiology Meets Surrealism: The Yoshida Effect has the Power to Fuse Bacteria and Nano-Acicular Materials

Nanorobots in Medicine: Advancing Healthcare through Molecular Engineering: A Comprehensive Review

Erosion Corrosion of Commercially Pure Titanium and Ti-6Al-4V Alloy in Sodium Chloride Solutions with and Without Suspended Solids

General Solutions for MHD Motions of Viscous Fluids with Viscosity Linearly Dependent on Pressure in a Planar Channel

Risk Contagion Effects of Interconnected Manufacturing Enterprises

Maternal Knowledge and Practices in Caring for Children under Five with Pneumonia: A Cross-Sectional Study in Vietnam

Indigenous Environmental Resilience: Decoding Ancient Rozvi Wisdom on Mountain Ecosystems as Disaster Management Solutions

The Impact of Stress on Periodontal Health: A Biomarker-Based Review of Current Evidence

Use of Extraterrestrial Resources and Recycling Water: Curb Your Enthusiasm

The Power of Artificial Intelligence for Improved Patient Outcomes, Ethical Practices and Overcoming Challenges

A Study to Determine the Reason for Lower Pregnancy Rates in Younger Women with Diminished Oocyte Reserve-less Chance of Implanting vs. Fetal Demise

Evaluating Digital Imaging Technologies for Anogenital Injury Documentation in Sexual Assault Cases

Lifestyle and Well-being among Portuguese Firefighters

The Conceptual View of the Department of Combat use of Communication Units on the Creation of a Training Game Complex for Training Military Specialists on the Basis of Leadership

About the Problem of Climate Warming

Levetiracetam-induced Rhabdomyolysis - A Rare Complication

The Comprehensive Regeneration Approach as a Framework for Sustainable Development and Biodiversity

Current Oscillations and Resonances in Nanocrystals of Narrow-gap Semiconductors

Estimate of Temperature Rise in the 21st Century for Various Scenarios

Contamination in Heat Exchangers: Types, Energy Effects and Prevention Methods

Massive Solar PV Potential in Sri Lanka

Homologous Series of Chemical Compounds in Three-component Systems (Aa+ – Bb+ – Cc–) and (Zn2+ - Ge4+ - P3-) in Generalized Form

Ammonia: A Trend of Dry Deposition in Vietnam

AI-Driven Smart Auditory Health Systems: Bridging Audiology and Public Health in Low- and Middle-Income Countries

Fibrin Contributes to an Improvement of an in vitro Wound Repair Model using Fibroblast-populated Collagen Lattices

LC-MS and HPLC-UV for Detecting Uremic Toxins: Two Validated Methods with Simultaneous Sensitivity and Specificity Evaluation

System for Detecting Moving Objects Using 3D Li-DAR Technology

Compatibility Analysis of Frequency Containment Reserve and Load Frequency Control Functions

Preparing for SpaceX Mission to Mars

On how Doping with Atoms of Gadolinium and Scandium affects the Surface Structure of Silicon

Wishful Thinking about Consciousness

Exit Schreiner Collection

Comparative Analysis of Lattice Pylons and Polygonal Monopods in the SNEL SA Electricity Network

EB Naevi-like Lesion in Infant Bullous Pemphigoid

Quantum Perception and Quantum Computation

Development of a Mechanical Seal Closed Design Model

Lunar-Derived Propellants for Fueling Mars-Bound Spacecraft in Cis-Lunar Space

The Expressivity Dimension of Speech is the basis of the Expression Dimension. Evidence from Behavioural and Neuroimaging Studies

A Machine Learning-based Method for COVID-19 and Pneumonia Detection

Assessment of Thermal Uniformity of Heating Plates Using a Thermal Imaging Camera

Assessing Bee (Hymenoptera, Apoidea, Anthophila) Diversity and Floral Preference in Two Habitats in the Iberian Peninsula

Climate Changes and Mango Production (Temperature)

Challenge and Readiness to Implemented Geothermal Energy in Indonesia

Various Media used to Detoxify Abrus precatorius - A Mini Review

Efficacy of Alternative Insecticides against Dusky Cotton Bug (Oxycarenus laetus) to Improve Yield Losses in Cotton Crops through Residue-based Bioassay

Biomimetic Synthesis of Calcium Carbonate in Bile in the presence of Amino Acids

Analysis of the State of Moisture Control to Ensure and Regulate the Quality of Grain and Grain Products

Modeling of an Electric-fired Brick Oven, Directly Heated

Enhancing Material Property Predictions through Optimized KNN Imputation and Deep Neural Network Modeling

The University Sector is Converging on Manufacturing in UK

The Examination of Game Skills of Children Aged 5-6 Years Participating in Movement Education

Country Risk to Face Global Emergencies: Negative Effects of High Public Debt on Health Expenditures and Fatality Rate in COVID-19 Pandemic Crisis

Theoretical Review on Microplastic Pollution: A Multifaceted Threat to Marine Ecosystems, Human Health, and Environment

Lattice Boltzmann Method without Invoking the M << 1 Assumption

A Survey of Motion Data Processing and Classification Techniques Based on Wearable Sensors

Mastocytosis: Principles and Pitfalls in the Diagnosis of a Unique Disease
![Benzo[4’,5’]imidazo[2’,1’:6,1]pyrido[2,3-d]pyrimidines: Past and Present](https://www.igminresearch.jp/articles/figures/igmin113/igmin113.g001.png)
Benzo[4’,5’]imidazo[2’,1’:6,1]pyrido[2,3-d]pyrimidines: Past and Present

The Impact of Teledentistry on Modern Dental Practice

Use of Augmented Reality as a Radiation-free Alternative in Pain Management Spinal Surgeries

AFM Analysis of Polymeric Membranes Fouling

Federated Learning- Hope and Scope

Cyber Threat Analysis (CTA) in Current Conflicts

Enforcement and Enlargement of the Saccharomyces cerevisiae Endoplasmic Reticulum through Artificial Evocation of the Unfolded Protein Response

Enhancing Missing Values Imputation through Transformer-Based Predictive Modeling

Smart Mobility and Sensor Based-BRT Crusade, the Challenge for Auto Mechanics and Technicians in Africa

Physical Activity and Lifestyle of Female Students of the Faculty of Health Sciences University of Applied Sciences in Tarnów (Poland)

The Influence of Dynamical Downscaling and Boundary Layer Selection on Egypt’s Potential Evapotranspiration using a Calibrated Version of the Hargreaves-samani Equation: RegCM4 Approach

The Educational Role of Cinema in Physical Sciences

Support for the use of Binomial Nomenclature in the Taxonomy of Viruses

Investigation of Lateral Vibrations in Turbine-generator Unit 5 of the Inga 2 Hydroelectric Power Plant

Prevalence of Diabetic Retinopathy among Self-reported Newly Diagnosed Diabetics

Dimensioning of Splices Using the Magnetic System

Will SpaceX Send Humans to Mars in 2028?

New Scientific Field for Modelling Complex Dynamical Systems: The Cybernetics Artificial Intelligence (CAI)

The Lukala Cement Plant's Life Cycle Analysis: Towards a More Sustainable Production

Risks and Effects of Medicinal Plants as an Adjuvant Treatment in Mental Disorders during Pregnancy

Properties of Indium Antimonide Nanocrystals as Nanoelectronic Elements

In Biological Research, Single-cell RNA Sequencing Answers the Puzzles around Unusual Cell Types

The Effect of Stacking Sequence and Ply Orientation with Central Hole on Tensile Behavior of Glass Fiber-polyester Composite

Auxological Status of Modern Primary School Students of Nizhny Novgorod Region

From Traditionalism to Algorithms: Embracing Artificial Intelligence for Effective University Teaching and Learning

Boundary Value Problems in Ellipsoidal Geometry and Applications

Reliability Evaluation of Professional Assessments

The Relationship between Energy and Climate Warming

Prevalence of Non-specific Low Back Pain Among Chinese Healthcare Workers (Surgeons and Surgical Nurses): A Multi-Center Survey Study

Preventing Rectal Toxicity in Prostate Cancer: Diet and Supplement Alternative to Enemas or Rectal Spacer

Diagnostic Challenges in Pancreatic Tumors

Revisit TBCK-A Pseudo Kinase or a True Kinase

Sensor-based Sorting using De-XRT Sensor Applied to a Greenfield Copper Ore Project in Southern Brazil

Knowledge Discovery on Artificial Intelligence and Physical Therapy: Document Mining Analysis

Artificial Intelligence & the Capacity for Discrimination: The Imperative Need for Frameworks, Diverse Teams & Human Accountability

Abrasive Wear in Some High Fe-Cr-C Alloy in Cement Powder
The wear behavior in solid metallic materials is of high importance because of its connection with production cost. In this work, the behavior of wear and wear rate is shown in grinding balls produced from high Fe-Cr-C alloys produced by melting in medium frequency induction furnaces, and molding by automatic fleckless molding machine– Disamatic moldings machine. The total testing time is (12 hrs). The abrasive wear rate, which is the wear resistance multiplied by testing time in mg/Kg.hr. Two grinding balls of each of the three alloys: BC26, BC18, and BC13 are tested by rotating the balls with (50 Kg), cement powder inside a diesel working mixer of circular sections, inclined 45 and rotating by 30 rpm. Weighting and hardness testing results are found in the text, the chemical composition was tested by using spectra analyses type ARL 34000 OE. All the results obtained are shown in the tables and figures in the text. As a result, it can be stated that increasing Cr%, increases hardness, and decreases the wear rate, and the harder and higher the Cr% and C% it contains, the lower the wear rate and the higher wear resistance.